Wood Varnish

Yield: ± 12 m²/L.

Application temperature: - 8 °C to + 35 °C.

Drying time: 3 hours (between each layer).

Commissioning: 1 days.

Properties:

   Lasting tone.

   Enhances the beauty of the wood.

   Long lasting: resistant and flexible film.

   Very fluid varnish - does not mask the veining of the wood.

   Easy application: no sanding between layers, except before the last.

   Can be stained with dyes (consult us).

Destination:

Hardwoods, new or old.

Interior: furniture, parquet...

Horizontal - vertical.

Direct on prepared wood.

Recommendations:

Beforehand, the wood must be clean and perfectly dry during application. Do not apply varnish in humid weather or late in the afternoon. Do not dilute.

Application:

Apply 1 to 2 coats of wood varnish depending on the exposure of the support. Leave to dry for at least 3 hours between each coat. There is no need to sand between coats. Leave to dry for 1 to 2 days before commissioning. Note: splashes or drips of varnish must be removed before the product dries. After drying, stains are very difficult to remove, so be very careful and remove these stains immediately after application.